Battery Not Charging Problem will solve with this 4 effective solutions.


Learn about mobile phone battery not charging issues and the best way to repair if your phone isn’t charging after connecting. Removable and Non Removable Battery. The rules and regulations apply to all manufacturers and models of mobile phones, including Android Smartphone, Nokia, Samsung, iPhone, China Mobile Phones, Motorola, HTC, Sony, Blackberry, Alcatel, Apple, AudioVox, Benefone, Danger, FIC, Hagenuk, Palm, Kyocera, LG, Panasonic, Huawei, ZTE, Xiaomi, Oppo, Spice, Lava, Sony Ericsson, Micromax and many more.

Battery Charging Section of a Mobile Phone

The Charging Section on mobile phones is the area that assists in charging the battery. The device is controlled via its charging IC as well as its Power IC.

Problems With the Mobile Phone Battery Isn’t Charging

The battery of the phone isn’t charging at all.

There is evidence of charging the battery, even though the battery isn’t charged.

At the moment that charging is done, the device will say it’s not charging.

If you connect the charger with the module with the charging device, it’ll indicate that it’s not connecting properly.

The charger that is linked to the telephone gets hot.

A phone that isn’t charging as you would expect.

The phones with batteries that are not removable do not charge.

The phone shows charging, however, the battery rate does not increase.

The phone charge is slow.

The battery cannot be charged 100% when using an Android Phone.

Cell Phone Battery Not Charging Problem and Solution

Step forward One by One:

Replace the charger and then check the voltage. The voltage should be between 5 to 7 Volts.

1.Clean, Resold, or Change the Charger Connector.

If the problem isn’t resolved Replace the battery and test. Non-Removable Batteries are Just Glued at the Bottom. They can be Removed Easily yet Little Carefully.

Verify the voltage from the Connector by using the Multimeter. The voltage should fall somewhere between 1.5 to 3.7 DC Volts.

If there’s no indication within the connector, look at the area where you charge. Examine the chart for the model that is specific to the cellphone. The graphs of track in books are readily available in centers for commerce.

If the problem isn’t resolved take a look at what’s happening with the Fuse, Coil, and Regulator regularly. Replace if needed.

If the issue doesn’t get resolved if it isn’t, either warm or replace it with the charge IC.

Ultimately Heat, Reball, or Change the Power IC.

2. Consider significant Note

If your phone is showing ” NOT CHARGING” you must replace the battery. After that, verify. If the issue doesn’t get resolved then remove the controller to stop charging (no reason warrants upgrade this controller).

3.If there isn’t a solution it is recommended to alter the R22.

If the issue cannot be resolved, remove both SMD capacitors that are connected to the Battery Connector ( No compelling reason to replace it).

4.If the issue persists, you can try altering that charging IC.

If your device displays ” FALSE CHARGING” you need to use a 3.6 Volt Zener Diode. It is also possible to use Direct Charging

And find Out the Best Power Source For Your Phone

You may have different cables, chargers, powerbanks, adopters for your Android phone. Do you ever wonder with which chargers or cables your phone charges most quickly? With this matter figured out, you’ll know how to charge your phone faster.

Ampere is a app designed to measure charging/discharging current of the battery. After you have connected your phone to a power source, the app will show minimum and maximum load levels , voltage and maximum current of the charger. You can compare the statistics of different chargers and decide which is performing best.

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More